Search found 61 matches

by eagle_awd
Tue Jun 04, 2019 3:06 pm
Forum: Technical discussions
Topic: TuneEcu experts needed - bike will not learn idle
Replies: 4
Views: 288

Re: TuneEcu experts needed - bike will not learn idle

I had exactly same symptoms with idling and when resetting/setting the TPS voltage. New TPS didn't help. Idle stepper motor was the culprit. One for the primary plates. I got one second hand from 990 adventure and all is good. Getting from the dealer was crazy as they make you buy whole throttle ass...
by eagle_awd
Mon Dec 17, 2018 6:27 pm
Forum: Technical discussions
Topic: Failure of the standard Rec/Reg and fried electrics
Replies: 1
Views: 449

Re: Failure of the standard Rec/Reg and fried electrics

Great info Stew...thanks for sharing.

Damn, just another thing to look out for :) That thing did a lot of damage, making me think about preventive replacement, if aftermarket units are relatively cheap...
by eagle_awd
Mon Dec 03, 2018 3:42 pm
Forum: Technical discussions
Topic: Fuel reserve light issues
Replies: 6
Views: 897

Re: Fuel reserve light issues

Cant really tell from the diagram either (#5)...maybe in that metal tube on the side?
2018-12-03_10-37-10.png
by eagle_awd
Fri Nov 02, 2018 7:04 pm
Forum: Orange, Silver, Black or ?
Topic: Parts needed - hopefully
Replies: 14
Views: 5462

Re: Parts needed - hopefully

Great to see your recovery is making good progress...keep it up :) !!!
by eagle_awd
Fri Oct 26, 2018 4:09 pm
Forum: Luggage
Topic: Instructions/manual for soft panniers?
Replies: 7
Views: 5348

Re: Instructions/manual for soft panniers?

Ah, I never new there was a lock kit for it :)...

And yes I can fit two 64oz growlers into each, and they hold up good :lol:

Image
by eagle_awd
Mon Oct 22, 2018 8:29 pm
Forum: Orange, Silver, Black or ?
Topic: Great picture of SMT wheelie
Replies: 2
Views: 1166

Great picture of SMT wheelie

On Visordown website:

https://www.visordown.com/motorcycle-ne ... roads-2016

Could care less of article, but picture is great :)
by eagle_awd
Mon Sep 24, 2018 2:11 pm
Forum: Technical discussions
Topic: Side stand sensor failure
Replies: 16
Views: 2408

Re: Side stand sensor failure

Let me know if I can measure my dongle somehow to help you out.

I'm electronics antitalent, but can measure basic things...I think :)
by eagle_awd
Mon Sep 10, 2018 2:08 pm
Forum: Technical discussions
Topic: Drop in oil pressure during high speed running.
Replies: 58
Views: 7323

Re: Drop in oil pressure during high speed running.

That really blows Elvis. :evil: Hopefully you hear back from KTM. Have to add it to check list once I open her up this winter... Problem found! The clip of the oil pump sprocket went out and the sprocket is now stuck between the case and clutch basket I found it out by inserting endoscope from the o...
by eagle_awd
Wed Jul 25, 2018 1:46 pm
Forum: Technical discussions
Topic: 990 Power Commander 5 & Tune ECU custom maps
Replies: 2039
Views: 507110

Re: 990 Power Commander 5 & Tune ECU custom maps

#14 & #15 are for the non-modified bikes, optimized and smoothed maps. #13 if you removed the secondaries.

Start there and see how bike reacts. Always save your stock map to backup first. :)
by eagle_awd
Thu Jul 12, 2018 2:19 pm
Forum: Technical discussions
Topic: Side stand sensor failure
Replies: 16
Views: 2408

Re: Side stand sensor failure

Can't really tell what's inside. I got it as preventive, because these sensors do go bad and did not wanna be left stranded on the side of the road, especially on the longer trips. And bypass was cheaper then new sensor :D Got used to checking even three times before I leave, to make sure stand is u...
by eagle_awd
Wed Jul 11, 2018 12:05 am
Forum: Technical discussions
Topic: Side stand sensor failure
Replies: 16
Views: 2408

Re: Side stand sensor failure

I have KTM bypass dongle and starts in any gear...
by eagle_awd
Mon Jun 25, 2018 2:20 pm
Forum: Technical discussions
Topic: Base gasket replacement (both cylinders) - Pics
Replies: 8
Views: 1667

Re: Base gasket replacement (both cylinders) - Pics

Thanks....This will come in handy for sure.
by eagle_awd
Wed Jun 20, 2018 4:29 pm
Forum: Teething problems
Topic: Splitting the cases !
Replies: 26
Views: 5255

Re: Splitting the cases !

Darn, it does suck being without bike for so long. Well I have sprung the leak at the same cylinder base gasket :( , front one. So I will be going trough same exercise coming winter. Hopefully leak doesn't get much worst by then. And keeping eye on this thread to see if you come up against any surpr...
by eagle_awd
Fri Jun 01, 2018 3:42 pm
Forum: Orange, Silver, Black or ?
Topic: Parts needed - hopefully
Replies: 14
Views: 5462

Re: Parts needed - hopefully

Oh man, that really sucks :( . Wishing you speedy and successful recovery Magic. Bike parts can always be replaced.
by eagle_awd
Wed May 09, 2018 4:20 pm
Forum: Technical discussions
Topic: Fork dust boot cleaning
Replies: 2
Views: 685

Re: Fork dust boot cleaning

Just a dull screwdriver, no heat, slowly pry it down...just the o-ring grease
by eagle_awd
Mon May 07, 2018 12:42 pm
Forum: Orange, Silver, Black or ?
Topic: Would you change an SMT for a 1090 Adventure
Replies: 28
Views: 18361

Re: Would you change an SMT for a 1090 Adventure

Two steps up would be 1290 ;) :D If going Adventure direction and not DukeGT, I would recommend 1290S. It's more road oriented and they're really, really nicely equipped. Huge LCD for dash.
by eagle_awd
Sun May 06, 2018 4:24 pm
Forum: Technical discussions
Topic: Immobiliser location
Replies: 3
Views: 980

Re: Immobiliser location

Actually sucker is under the tank, frame triangle...

Image
by eagle_awd
Sun May 06, 2018 3:58 pm
Forum: Exhausts
Topic: Exhaust packing
Replies: 2
Views: 1913

Re: Exhaust packing

You're right, I think it's there to protect the packing from blowing out too fast. I read that acrapovic has similar set-up, so will keep it on. Tried to clean it out with some air, but no use so I got some medium thickness stainless wool and wrapped it around. This material is bitch to work with, n...
by eagle_awd
Wed May 02, 2018 6:54 pm
Forum: Exhausts
Topic: Exhaust packing
Replies: 2
Views: 1913

Exhaust packing

After 30k on the cans, they have gotten too loud (if there's such a thing) and it's time to re-pack. These cans have a steel wool that's around the perforated core. Looks like it's spot welded to the tube in few spots and it would be difficult to wound a new layer and pack it all back in. Should I g...
by eagle_awd
Mon Apr 30, 2018 3:30 pm
Forum: Technical discussions
Topic: Immobiliser location
Replies: 3
Views: 980

Re: Immobiliser location

Looks like it's under the dash...#13
2018-04-30_10-27-03.jpg